Wavytalk Steamline Pro Steam Hair Straightener Brush Review
I tried the Wavytalk Pro steam straightener brush for the first time on fine, wavy hair. One pass, pin-straight results, and one hot lesson learned.
This post contains affiliate links. I may earn a commission at no extra cost to you.
I have really fine hair and I wear it in a ponytail a lot, and when I take it out I get these little bumps through it. That’s the whole reason I picked up the Wavytalk Pro steam brush and tried it for the very first time on camera. I had no idea what I was doing. I love testing products like that, because if I can pull it off with zero prep, so can you.
Quick Verdict
One slow pass through a wavy section and my hair came out pin straight. No metal plates yanking, no snagging, just steam. The catch: it gets hot fast, and I grabbed a strand bare-handed and yelped.
Buy if you:
- Wear your hair up a lot and get those little bumps and waves when you take it down
- Have textured, thick, or coily hair a metal flat iron snags on
- Want a comb and straightener in one tool instead of two
- Are new to hair tools and want something almost foolproof
Skip if you:
- Won’t bother with the included glove (I skipped it and paid for it)
- Refuse to section your hair first, since you can’t re-grab a section once it’s hot
- Travel abroad often and don’t want to deal with a plug adapter
| Temperature range | 325°F to 410°F, 4 settings |
|---|---|
| Heat-up time | ~30 seconds |
| Water tank | 15 ml (~27 min of steam) |
| Steam system | Hydro-Infusion, nano-mist nozzles |
| Safety | Anti-scald shell, 30-min auto-off |
| In the box | Brush, dropper, cleaning brush, scrunchie, 2 clips, glove |
I Have No Idea What I’m Doing, and That’s the Point
It’s a steam straightener brush, not a flat iron, and that distinction matters the moment you pull it through a wavy section and feel zero snag. One pass, pin straight, no clamp, no tug. Here’s what worked, what burned me, and the one thing I’d change before your first try.
What the Wavytalk Pro Steam Brush Actually Is
It’s a 3-in-1 steam straightening brush, which means it straightens, combs, and steams in one go. This looks like a very unique brush with little holes along the plate, and that’s where the heat and steam come out. You’ve got a power button, then you cycle up through the different modes, and a separate steam button you can turn on and off.
There’s a little guide that tells you which temperature to use for your hair. I went all the way up on my first try, which I don’t think I needed for fine hair, but we were testing it. It heats up in about 30 seconds and runs from 325°F to 410°F across 4 settings. The 15 ml water tank gives you roughly 27 minutes of steam, and it shuts itself off after 30 minutes.
One Pass and My Hair Went Pin Straight
The result showed up faster than I expected. My hair isn’t curly, but it’s not straight either, so I grabbed a small section with some pretty good waves and slowly brought the brush through. It came out pin straight after one pass. Look at that. I did literally one pass on two little sections and the difference was dramatic enough that I showed the before and after right away.
Here’s what I noticed that regular straighteners never give me. Every time I use a metal flat iron, I feel it pulling and snagging my hair. This one doesn’t have those metal plates. It’s got this little rubbery bit and it works with the power of steam instead. I use a steamer on my clothes, so using one in my hair makes sense. On the side where I did three passes versus the untouched side, the comparison was obvious. I could not wait to do my whole head.
It Is Hot. I Learned That the Hard Way.
The biggest surprise is how hot this thing runs. I wasn’t wearing the glove. I said on camera I felt like I was going to regret that, and I did. I grabbed my hair mid-pass and yelped, “It is hot. Wow, I just grabbed my hair.” That is clearly why they include the glove.
It’s hot because it’s working, and that’s the trade with a steam tool. The other little gotcha is sectioning. I kept forgetting to section my hair and just grabbing pieces quickly, but once a section is hot you can’t grab it again. If you section it off properly with the included clips and scrunchie first, you avoid burning yourself reaching back in. Do as I say, not as I did on the first try.
Learn more
Wavytalk Pro Steam Brush
Get the best price today →This post contains affiliate links. I may earn a commission at no extra cost to you.

Who This Wavytalk Pro Steam Brush Is Really For
If you’re a ponytail person like me who ends up with bumps and waves through fine hair, this is a fast fix. One pass, half up, half down, and you’re done. It’s also built for thick, textured, and coily hair, since the steam and non-metal plates avoid the pull that a standard flat iron gives that hair type.
It’s also forgiving enough for someone who skips the instructions, which is exactly what I did. I sectioned nothing, cranked it to the highest setting, and still had pin-straight hair after one pass on my first try. The learning curve is basically: fill the tank, press steam, pull through slowly.
Steam Brush vs. a Regular Flat Iron
With a flat iron I feel every snag, the clamp grabs, catches, and drags all the way to the tip. This brush doesn’t clamp at all: it’s a rubbery base and steam, and it slides through a section in one smooth motion. That single difference is the whole reason I’d reach for it over my regular straightener on a rushed morning. There’s no clamp, just the rubbery brush base and steam doing the work, so it feels gentler even on fine strands.
The trade-off is speed and precision. A flat iron gives you tight control right up to the root and around edges, and it doesn’t need water in a tank. This brush is more of a comb-through motion, so if you want ruler-flat precision on tiny sections, a flat iron still edges it out. For everyday smoothing without the yank, the steam brush wins for me.
What I’d Tell You Before Your First Try
Wear the glove from pass one. Don’t be me. Section your hair with the clips and scrunchie before you turn the steam on, because once a section is hot you cannot comfortably grab it again. And don’t crank it all the way up if your hair is fine. There’s a temperature guide, and lower settings likely do the job without extra heat.
Fill the water tank with the included dropper before you start, keep the cleaning brush for maintenance, and remember it auto-shuts off at 30 minutes, so you’ve got a comfortable window to finish your whole head.
Pros
- Pin-straight results in a single pass on wavy fine hair
- No metal plates, so no snagging or pulling like a flat iron
- Steam-based, which felt gentler on my hair
- Beginner-friendly, I got salon-looking results with zero experience
- Comes with a glove, clips, scrunchie, and dropper
Cons
- Gets very hot, I burned my hand grabbing a strand bare-handed
- You can’t re-grab a section once it’s hot, so sectioning first is a must
- Needs the tank refilled and only runs about 27 minutes per fill
Frequently Asked Questions
Does the Wavytalk Pro steam brush work on coily and thick hair?
Yes, it’s designed for coily, thick, and textured hair. The steam and non-metal plates avoid the tugging that a flat iron gives that hair type. I tested it on fine wavy hair and got pin-straight results in one pass, so denser hair may just need a couple more passes.
Do I need to wet my hair before using it?
No, use it on dry hair. The steam comes from the water tank inside the tool, not from wetting your hair. You fill the 15 ml tank with the included dropper and the brush turns that water into vapor as you go.
How hot does it get, and is it safe near the scalp?
It gets hot enough that I burned my fingers grabbing a strand without the glove. It has an anti-scald shell designed for use near the scalp and edges, but wear the included glove and be careful. Hot is the point, it means it’s working.
How long does the steam last per fill?
About 27 minutes on a full 15 ml tank. That’s usually enough for a whole head, but on very long or thick hair you may need to refill. The tool also auto-shuts off after 30 minutes.
Can I use it while traveling abroad?
Yes, it supports universal voltage from 100V to 240V. It ships with a U.S. standard plug, so you’ll need a plug adapter for outlets in other countries, but no separate voltage converter.
What temperature setting should I use?
Start lower if your hair is fine and go higher for denser or coilier hair. There are 4 settings from 325°F to 410°F and a little guide to match your hair type. I went all the way up on my first try and didn’t need to for fine hair.
How do I clean it?
Use the included cleaning brush on the plate and nozzles once it’s fully cooled. Empty any leftover water from the tank after each use so it doesn’t sit inside. Never rinse the tool itself under water.
Is it worth it over a cheap flat iron?
If your hair snags on metal plates, yes. The steam-and-brush approach glides instead of clamping, so there’s no pulling. A flat iron still gives tighter precision at the root, but for everyday smoothing without the yank, this was the better experience for me.
Clicking takes you to the seller's website. We may earn a small commission if you purchase, at no extra cost to you.
Learn more
Wavytalk Pro Steam Brush
Get the best price today →This post contains affiliate links. I may earn a commission at no extra cost to you.

🛍️ Shop everything in this video
Every product mentioned, in one place — these are affiliate links, so I may earn a small commission at no extra cost to you.
🛍️ Wavytalk Pro Steam Brush — check price on Amazon →




