ANDERY Car Phone Mount Review: The Suction Lock That Can Lift a Table
The suction is so strong Seb lifted a table with it. Lock the mechanism, stick it to any flat surface, and it is not moving — dashboard, centre console, or anywhere else. MagSafe magnetic grip plus optional flat-surface sticker for curved dashboards.
👍 Best for:
- iPhone MagSafe users
- Anyone with a curved or textured dashboard
- Commuters who use GPS daily
- Rideshare drivers
What’s included:
- Mount with twist-lock suction base
- 360° adjustable arm
- Flat-surface sticker for curved dashboards
- MagSafe compatibility kit for non-MagSafe phones
The Car Phone Mount Problem Everyone Has Had
Car phone mounts fall into two failure categories: suction cups that pop off the dashboard mid-drive, and magnetic mounts that drop the phone when you hit a bump. The ANDERY car phone mount addresses both with a twist-lock suction mechanism that physically locks the suction cup to the surface rather than relying on passive adhesion alone. The difference is not subtle — Seb demonstrated by unlocking the mount from a table surface and letting the suction alone hold the table up. The table lifted. The mount did not release.
The Twist-Lock Mechanism: How It Works
Place the mount on any flat surface, then twist the locking ring — the mechanism mechanically increases suction and locks it in position. To remove, twist to unlock, then peel. No residue is left on the surface. The lock means bumps, vibrations, and temperature changes cannot gradually weaken the hold the way standard suction mounts degrade over time.
MagSafe Grip: Phone Snaps In, Stays In
The magnetic phone grip is MagSafe-compatible — iPhone 12 and later snap directly to the magnetic pad. The 360° adjustable arm lets you position the phone in portrait or landscape at any angle. For non-MagSafe phones, the included compatibility kit adds a thin magnetic plate to your phone or case using a wet-wipe prep and adhesive — converting any phone to MagSafe-compatible in under two minutes.
The Dashboard Sticker: Solving Curved Surfaces
Many modern cars have curved or textured dashboards that suction cups struggle to grip. ANDERY includes an oversized flat adhesive sticker — apply it to your dashboard to create a smooth mounting surface, then use the suction mount on top. The sticker is thin enough to be barely noticeable and creates a permanent optimal mounting spot that the mount can be removed and reattached to repeatedly.
FAQ
Does it work with thick phone cases?
MagSafe works through cases up to around 3mm thick. Very thick or metal cases may reduce magnetic hold — for these, the included MagSafe compatibility kit applied directly to the case provides the strongest connection.
Will the suction damage my dashboard?
The mount leaves no residue on smooth surfaces. For the adhesive sticker option, it is designed for long-term placement — removing it may leave slight adhesive residue depending on your dashboard material.
Final Verdict: 4.5/5
The ANDERY car phone mount solves the one problem every other car mount has — it does not fall off. The twist-lock suction is genuinely different, the MagSafe grip is strong, the 360° arm covers any viewing angle, and the included kit for curved dashboards and non-MagSafe phones means it works for everyone. Check today’s price on Amazon.
